Import Approval and Surveyor Reports in Indonesia: What Must Be Completed Before Shipment?
Before dispatching an ordinary overseas shipment that requires both Persetujuan Impor (PI), or import approval, and a Laporan Surveyor (LS), or surveyor report, check the issued approval and confirm the designated surveyor has completed technical verification. Report issuance is a separate step. Plan to have the LS when the goods rule requires it, and check the expected arrival against the approval dates before releasing the cargo.
Match the issued approval to the shipment
For goods subject to import licensing, Article 4 of Minister of Trade Regulation No. 16 of 2025 requires the importer to hold the required license before the goods enter the customs territory. Make the check before dispatch. Confirm that the issued PI names the importer and covers the goods, quantity and unit, origin, destination port, and dates. If the requirements are in doubt, start with the guide to checking whether your goods need import approval.
Suppose a producer plans a direct shipment of semi-finished spades to Indonesia for finishing. Row 552 in Annex I, Table III, of Minister of Trade Regulation No. 22 of 2025 lists Harmonized System (HS) code ex 8201.10.00 for semi-finished spades and shovels that still require sharpening at the front edge, painting, handle fitting, and trademark marking. The row marks PI and LS and leaves the post-border column blank. The shared conditions restrict the ordinary importer route to holders of Angka Pengenal Importir Produsen (API-P), or producer importer identification. Official industrial goods annex, PDF page 70
The ex qualifier limits the entry to goods matching its description. Use the product specifications and the remaining finishing steps when you check the Indonesian tariff classification. Confirm the importer’s producer importer status and compare the company name and Nomor Induk Berusaha (NIB), or business identification number, with the importer’s current company records.
Book the surveyor and confirm verification is complete
Regulations No. 37 of 2025 and No. 18 of 2026 amended the general import rules in Regulation No. 16 of 2025. Under Article 29, the importer applies electronically through the system of a surveyor designated by the Trade Minister. For the ordinary overseas route, verification takes place in the country of origin, the loading country, or the overseas loading port.
Agree with the surveyor which shipment the verification covers. Article 9 of Minister of Trade Regulation No. 16 of 2021 includes document checks and identification of the goods’ specifications, quantity, and loading location or origin. Have the supplier confirm that the goods prepared for dispatch are the ones covered by the completed verification.
Send the surveyor the complete and correct final packing list and invoice for report issuance under Article 10(2) of that regulation. When import licensing is required, Article 29(6a) of the general import rules allows the surveyor to issue the report only if the conditions in the issued license are met.
For the direct spade shipment, plan for the LS as a customs supporting document. Under Article 29(6), where the goods rule provides for post-border supervision, the LS is checked after the goods pass through the customs area. Article 29(4) separately allows verification in free trade and free port zones, special economic zones, and bonded storage facilities if import rules apply when foreign-origin goods leave those areas for another place in the customs territory.
For semi-finished hand tools processed, assembled, or installed for export, Article 10(1) of Regulation No. 22 of 2025 exempts the import licensing and verification requirements when the import qualifies under the Kemudahan Impor Tujuan Ekspor Pembebasan, the import-for-export exemption facility. Check the facility and intended use before relying on that exception.
Check what happens if the approval is about to expire
Regulation No. 18 of 2026 was promulgated on June 4, 2026. Article II sets a 30-day delay from that effective date for the new issuance conditions in Article 29(6a)–(6c) and the PI-number and date check in Article 31(d).
Under Article 29(6b), the surveyor can issue the LS after the import authorization expires if the required overseas verification has taken place and the goods arrived at the destination port before expiry. The date of the customs manifest, BC 1.1, is the evidence of arrival. Keep the verification record and manifest date for that shipment.
Article 29(6c) modifies the arrival condition only for goods eligible to arrive after expiry under the applicable rules. The overseas verification condition still applies. Use the BC 1.1 manifest date to establish arrival after expiry and a bill of lading or air waybill to prove the goods were loaded while the authorization was valid.
If the producer learns that the spades may arrive late, check whether the shipment qualifies for a PI extension while the approval is still valid. The semi-finished hand-tools annex calls for a valid PI, the importer’s statement accepting full responsibility, and the bill of lading or air waybill. The statement must confirm loading before expiry and explain the delay. A later LS does not extend the PI. Confirm which issued approval or extension can be used when filing the declaration.
Match the report and declaration before clearance
For the ordinary shipment, Article 29(7) limits an LS to one shipment and one import customs declaration. Under Article 31, compare the report number and issue date, HS code, and destination port between the LS and the declaration. Where PI is required, match the PI number and issue date on both documents. Article 31 has a destination-port exception for reports issued in specified facilities or zones.
When you compare the declaration with the issued PI, check its number, issue and expiry dates, HS code, quantity and unit, and destination port. Under Article 25(5)–(7), the approval’s validity is checked when the applicable declaration is submitted, and the manifest date must fall within the start and end dates, inclusive. For later LS issuance, Article 29(6b) specifically calls for arrival before expiry unless Article 29(6c) applies. If the LS needs a correction before use as a supporting document, the importer requests it through the surveyor’s system. Under Article 30, the change must meet the issued import license conditions where licensing is required.
